The challenge
Radar Group asked DCP to help choose products for smooth industrial floor and wall systems in its stores in Chouaifet (Shwayfat), Lebanon. The work covered 1,891 m² of floors and 1,023 m² of walls.
The DCP solution
The DCP technical team proposed epoxy coatings for both floors and walls. Floors were etched with Don Acid Etch and repaired with Quickmast 341 epoxy paste, then coated with Strongcoat EC10 and Strongcoat EC50 in three coats at 375 microns. Walls received a fair face paste coat of Cemfair FD, then two coats of Strongcoat EC10 at 150 microns.
DCP products used
Flooring
Strongcoat EC10
Solvent based epoxy resin floor and wall coating Product page: Strongcoat EC10Specifications: Strongcoat EC10
Flooring
Strongcoat EC50
High build solvent based epoxy resin coating Product page: Strongcoat EC50Specifications: Strongcoat EC50
Concrete repair
Cemfair FD
One component polymer modified cementitious fairing coat and cosmetic repair mortar Product page: Cemfair FDSpecifications: Cemfair FD
How it was applied
- Floors: etch the concrete with Don Acid Etch.
- Floors: fill defects with Quickmast 341 epoxy paste.
- Floors: apply Strongcoat EC10 and Strongcoat EC50 in three coats at 375 microns.
- Walls: apply Cemfair FD as a fair face paste coat.
- Walls: apply two coats of Strongcoat EC10 at 150 microns.
